Category Archives for "Exterior Accessories"

Which is the best Kayak Rack for Subaru Crosstrek?

Best Kayak Rack for Subaru Crosstrek

The Subaru Crosstrek is a smooth 148 horse power machine with just under 9 inches ground clearance. It is an all weather vehicle that can be driven well even over rough terrain. While it is not top of the range in terms of speed, it is a very comfortable car to be in especially on long drives.

Before installing a kayak rack on this vehicle, you will need to install cross bars. The Crosstrek unlike its Outback cousin does not come with inbuilt cross bars. There are many varieties of cross bars to choose from in the market.

Choosing cross bars will require that you know the load rating that is convenient for you, the length of the cross bar and how much you are willing to spend. There are various brands which you can choose from. When choosing the length, make sure the bar does not overhang. If it does, it might hit people’s heads as they leave the vehicle.

Rola Kayak Carrier Roof Rack | Best kayak rack for the Subaru Crosstrek

Rola Kayak Carrier Roof Rack

There are many quality kayak carriers out there. One of the best brands which you will get at an affordable price is the Rola Kayak Carrier Roof Rack. It has great features for water craft enthusiasts and these will work well on your Crosstrek.

  • This carrier is made of heavy duty powdered steel. The steel material makes it very strong and therefore long lasting. You can use it near salt water bodies as it is rust-resistant as well.
  • When you carry your craft on your car, you want it to be safe from dents especially when travelling on bumpy roads. This carrier comes with foam pads which shield your craft during transportation.
  • This craft uses universal hardware. This hardware is compatible with most crossbars that you will come across. Hence it will work well with the Subaru Crosstrek.
  • This is one of the few carrier brands that you will find with durable straps. The straps offered by ROLA are heavy duty straps that will last you a long time. The craft carrier also comes with bow and stern tie downs.
  • The ROLA comes with a five year warranty. This is another assurance of the quality of the product.

How to Install the Rola Kayak Carrier Roof Rack

How to Install the Rola Kayak Carrier Roof Rack

The package will come with a list of all the components and they will be labelled with alphabetic characters. These will guide you in the installation.

  • Clean you crossbars before beginning installation. Wiping them down with a wet cloth will be enough. Let them dry before proceeding.
  • Remove the clamp knobs by unscrewing them from the J-Rac. This will cause the clamp bracket (labelled F) to come loose. The clamp knobs (labelled G) are screws which have a head with three sides.
  • Pull off the clamp bracket from the J-Rac and then place the J-Rac on your first crossbar. Once you are sure this is the position you want it on, hold it firmly down.
  • Now slip back the clamp bracket through the carrier bolts (labelled H) and screw back the clamp knobs so that they are snug, but not tight. This will secure the rack onto the crossbar.
  • Pick up the second J-Rac and repeat the process. Unscrew the clamp knobs, remove the clamp bracket, place the rack on the back crossbar, return the clamp bracket and screw on the clamp knobs.
  • It is important when using these carriers to place your crossbars at least 24 inches apart. If they are set any closer than this, they will compromise stability. Reset them to comply with this specification.
  • Also, align the J-Racs so that they match on each crossbar. Once you are sure that they match, tighten the clamp knobs completely.
  • Take the Cam Buckle Strap (labelled C) and pass it through the Cam Buckle Cover (labelled B) and leave the buckle exposed at the rear.
  • Loop the strap through the top of the J-Rac that is on the first crossbar and then tie a knot.
  • Now load the craft onto the racks and let the two ends of the strap (the one with the buckle at the end and the loose end) hang over the craft. If the craft is loaded sideways, and the top is facing you, then the straps should come from the back, over the side and hang on the side facing you.
  • Slip the loose end under the crossbar and then up into the cam buckle. Pull it through to ensure a tight fit. Now fit the Cam Buckle Cover over the buckle to keep it secure.
  • Repeat this process for the back crossbar. It would be more convenient to place the strap onto the J-Racs on both crossbars before loading the craft. This will allow for faster loading.
  • Take the rope (D) and put it through the hole in hook (E) and then tie a knot. Look for a place to secure the hook such as the tow loop or a metal surface on the bumper. Put the other end of the rope through the end of the kayak at the rescue bar.
  • Ensure that the rope is pulled to tautness and then tie a knot to secure it. You can tie up the excess rope.
  • Repeat this process of using the hook to secure the craft to the vehicle at the front. Look for a place to pass it through the front and tighten it as well.
  • Test the tightness of the ropes by trying to rock the craft back and forth or from side to side. If there is movement, then you need to tighten the ropes more.

Points to note

The weight limit of these carriers is 165 pounds. This consists of the weight of the crossbars, the carriers and the watercraft. You will thus require to know the weights of each of these components so that you do not exceed this total weight.

The ROLA rack is an excellent match for the Subaru Crosstrek. It will fit very well and also last you through the seasons and for many years. This is a carrier which has been made to last.

Do You Know?

By amin

Top 5 Suitable Kayak Racks for Subaru Outback

Kayak Racks for Subaru Outback

The Subaru Outback is a premium all-wheel sports utility vehicle that comes with excellent specs. It has a lift gate rear cargo access, led brake lights, lip spoiler and roof rack among many of its awesome features. For kayaking enthusiasts, the roof rack is a great addition to an otherwise superior vehicle.

The Outback comes with the cross bars embedded in the roof rack system that comes with the vehicle. This is only for the Outback from 2010 onwards. The cross bars are locked down on the lengthwise carriers but you can detach them on one end and fix this end across onto the other side. This then allows you to fix your kayak carrier onto the cross bars.

It is a great help to have these as you will not need to incur extra expense getting them as extras. Once you are done using them you will return them to their original position and have reduced resistance while you drive.

One of the advantages of having inbuilt racks on your vehicle is that you will not need to buy cross bars along with the kayak carrier you purchase. You just need to get a model that fits onto these bars.  However you can also purchase a multi-purpose base carrier system that will allow you to attach longer cross bars and carry more crafts.

There are many craft carriers available in the market.  The type you get and the number of crafts you want to carry will determine the one you purchase. Some of these models allow for crafts to be carried while tilted on the side. This allows you to carry more than one. Others will transport the craft right side up or upside down making it possible to carry only one.

Choosing a carrier will require that you know what features are important to you.  Most racks will come in strong steel material, have anti-rust coating, and have all hardware required for assembly, an instruction manual and warranty. There are some which offer helpful extras such as adjustable carriers which rotate down for garage access and up for transporting a craft.

Top 5 Suitable Kayak Racks for Subaru Outback

#1. 2 Pairs Universal J Shape Steel Kayak Canoe Paddle Surf Snow Board Carrier Roof Rack Car Top Mount

2 Pairs Universal J Shape Steel Kayak Canoe

These racks come in two pairs with the J style design. They have four tie- down straps and hardware that is easy to put on and off. They can accommodate 36 inches width and carry up to 75 pounds. The carriers can be fit onto cross bars that are square, oval or flat. In addition to all these, they have adjustable padding to protect your craft as well as increase the carrying strength.


  • The carriers and the hardware are made of strong quality material. They will thus last long and you can carry heavy crafts on them.
  • They are very affordable. The price on Amazon is way below common name brands.
  • They come in two pairs allowing you to carry more than one craft. Some people carry three crafts with these carriers. Two of them face outward and one is stuck in the middle. However two is an ideal number to carry.


  • They take long to assemble and the instructions given are not very easy to understand.
  • The padding wears off quite fast. You may need to replace this especially of going on a long trip. However for the price that is offered, this will not be a major setback.
  • The straps provide may not be adequate when carrying your craft and you may need to bolster them with addition ratchet straps.

#2. TMS J-Bar Rack HD Kayak Carrier Canoe Boat Surf Ski Roof Top Mounted on Car SUV Crossbar

TMS J-Bar Rack HD Kayak Rack

These J style bars are made of strong steel material with the J design being set wide mouthed for ease of loading and unloading. It comes with all the hardware for installation and can accommodate 75 pounds weight and 36 inches width. The carrier also has adjustable padding in place.


  • They are easy to install and easy to remove. You do not have to be tech-savvy to install these.
  • They come at a cheap price.
  • They are long lasting because of the durable material.
  • The 75 lbs capacity will allow you to carry more than one craft, or a craft and camping gear.
  • The adjustable padding offered here is great for protecting your craft during transportation. You will also be protecting your car with this padding.


  • The instructions that come with these are very poor and so is the diagram accompanying them. If you have no experience with this, this can cause a lot of frustration.
  • You will need to replace some of the tools coming with the set as they are not strong enough for assembling. For example, a stronger wrench will have to be sought.
  • The straps must be replaced as it is impossible to keep them tight. They seem to stretch when you tighten them and so cannot be relied upon to keep your craft safe.

#3. J-Bar 2 Pairs Universal Kayak Canoe Top Mount Carrier Roof Rack Boat SUV VAN Car

2 Pair Universal Canoe Car Top Mount Carrier Roof Rack

These carriers are offered as two pairs in the J-style and can carry two crafts. They come with 8 inch straps which can be used to secure a 36 inch wide craft.  The design is made of steel including the mounting hardware.  They can fit most cross bars except round and oval shaped bars.


  • The price is friendly and also a fraction of the price of name brands. The price also stands out because the offer comes with two pairs.
  • They are easy to install and mount. The installation is fairly easy even for someone without any experience.
  • The two pairs offered here will enable you to carry more than one craft on your Outback.


  • They are not a universal fit and will not fit on round or oval cross bars.
  • They are not rust resistant. Have some rust resistant paint on hand as you may have to coat them yourself.

#4. ROLA (59912) J Style Kayak Carrier Roof Rack

This is one of the high quality craft carriers you will find on Amazon. It is made of very strong steel with powder coating to resist rust and last for a long time. It has foam pads for extra strength and craft protection and is compatible with universal hardware. This carrier also comes with heavy duty straps and tie-downs for the bow or stern.


  • They are made from very high quality material that is long lasting. They are made from high density powder coated steel which is very strong.
  • They attach with wing-nuts by hand making it easy for anyone to attach them. No tools are required for this installation.
  • They work on almost all types of crossbars.


  • The instructions are accessed online and you will have to print them out. You can overcome this setback by downloading them onto your phone or iPad. This way you can access them during installation.
  • The bolts may be loner than you need and might need replacing.

#5. ABN J-Rack – Roof Top Mounted Kayak Canoe SUP Ski Surf Carrier for Car/Truck/SUV, All Weather Resistant Steel J Bar

This type of carrier can be used on most cross bars and load bars. It comes with all the mounting hardware plus two nylon tie-downs. The material is made of high strength steel and installation is tool-free. The coating on all the hardware makes it rust-free and therefore long lasting. Crafts of not more than 36 inches wide and weighing 75 lbs can be accommodated.


  • They are easy to assemble and attach.
  • They come at a fairly cheap price.
  • They are made of steel making them very strong and durable.


  • The straps are not of high quality material. They are very weak and must be replaced.

There are many brands of Kayak racks suitable for the Subaru Outback. Some name brands such as Yakima and Thule have very high quality carriers. However in most cases these will have to be bought with other parts in order to become useable. The prices of most name brands are quite high and none come in pairs

The brands listed above are some of the brands that come cheap. Some parts may need to be replaced such as tools and some bolts. Having on hand some rust-resistant paint is also a good idea.  The price of these additions will still be nowhere near the higher priced name brands.

The ultimate goal is to get craft carriers that work well and last long. You will be able to achieve this with these brands. You pocket will not suffer much from choosing them either.

Do You Know?

5 Best Kayak Racks for Subaru Forester

Kayak Racks for Subaru Forester

The Subaru Forester is one of the best crossover vehicles. It comes with ample space for passengers and luggage, all wheel drive, fuel economy and great visibility.  For kayaking lovers, this vehicle comes with roof racks consisting of side bars.

This is a great vehicle to attach craft carriers on. It will need to be paired with excellent cross bars and craft carriers in order to become functional in this way.

Thus as a Subaru Forester owner, you will need to make a choice of carrier as well as purchase cross bars along with this. There are excellent brands of cross bars, though you can have factory made ones. Most people prefer to purchase them from recognized brands such as Yakima and Thule. However, there are cheaper alternatives that you can check out on or eBay.

You may attach the cross bars yourself or have a professional do it for you. Most of the brands are easy to attach without help. Just make sure that they are fitted securely as you will be attaching your craft carrier onto them.

Selecting a craft carrier

There are many kayak carriers in the market and the prices can be very cheap, average or really expensive. The name brands are quite pricey though they guarantee quality of the purchase. However for those on a budget, offers quite a number of quality carriers. A few of them are discussed below.

Top 5 Best Kayak Racks for Subaru Forester

#1. ROLA (59912) J Style Kayak Carrier Roof Rack

ROLA (59912) J Style Kayak Carrier Roof Rack

If you are looking for something of great quality and that will last long, this is one of the best brands. The hardware is rust resistant and the J-bars are made from high strength powder coated steel. It works well with universal hardware and nearly all cross bars. With this package you will get heavy-duty straps as well as tie-downs for your bow or stern. This carrier comes from Australia and has been tested in the outback. You can be sure that it will hold whatever the terrain you are travelling in.


  • It is made of strong durable material and will last you for years to come.
  • Its strong straps will not need to be replaced. They are heavy-duty and will secure your craft well.
  • You do not require tools to attach them as they come with wing-nuts which you attach by hand.


  • It does not fold. You will have to store it as it is or take it apart.

#2. ABN J-Rack

ABN J-Rack - Roof Top Mounted Kayak Canoe

The design of this carrier allows for easy installation and removal from the vehicle. It is made from rust-resistant steel. It is strong and has a wide mouthed frame which enables you to load your craft easily and unload it as well. The padding on the frame keeps your craft from scratching as you transport it.


  • It is made of strong materials that do not wear out with changing seasons.
  • It is easy to install and to take down so that you do not have to spend a lot of time on this.


  • You will have to replace the straps as they are not of the best quality.

#3. 2 Pairs Universal J Shape Steel Kayak Rack

2 Pairs Universal J Shape Steel Kayak rack

This steel carrier has tubes which are 1.5 mm thick and has adjustable padding for extra strength and to protect your craft. It comes in two pairs and has 4 tie-down straps. The weight capacity is 75 pounds and the width capacity is 36 inches.


  • They are strong and of good quality.
  • They are quite affordable as compared to other carriers in the market.


  • They cannot go through the car wash. You will have to take them down.
  • The installation instructions are pretty scanty.
  • The straps provided are not very strong and may need replacement.

#4. TMS® 2 Pairs J-Bar Rack HD Kayak Rack

TMS® 2 Pairs J-Bar Rack HD Kayak Rack

This is a carrier that can be mounted on all shapes of cross bars available. With a large vehicle you can mount four sets of racks. They are made of steel material with adjustable padding to protect your craft. The mounting hardware comes along with the package and it has rust resistant coating to make it last longer. The capacity is 36 inches width and 75 lbs weight.


  • It is easy to assemble and install.
  • It is made of very strong material and will last a long time.


  • They have poor locking mechanism and the clamps don’t hold up.
  • The wrench provided will need to be replaced with a proper ratchet wrench.

#5. J-Bar 2 Pairs Universal Kayak Canoe Top Mount Carrier Roof Rack Boat SUV VAN Car

J-Bar 2 Pairs Universal Kayak Canoe Top Mount Carrier Roof Rack Boat SUV VAN Car

These are carriers that cater specifically for flat or square cross bars. They come in two pairs and have four 8 inch straps. They can be mounted on bars that are no thicker than one inch and no wider than 2.5 inches.


  • They hold up quite well on long journeys.


  • You may have to replace all the bolts and nuts as they are made of poor quality material.
  • The straps may not be long enough when you want to strap them under the cross bar.
  • The hardware is not rust resistant. You may have to coat it if you intend to use the carrier near salt water.

For your Subaru Forester, the ROLA carrier would be the logical choice based on its strength and endurance. It is well tested and designed to endure all seasons. It is strong and rust resistant and the straps that come with it are heavy duty. It is a little bit pricier than others but it is also long lasting.

Do You Know?


5 Reasons Why You Need Kayak Rack For Your Pickup Truck?

Kayak Rack For Pickup Truck

Owning a kayak means that you are an enthusiast. Whether you use it to go fishing, or for sport, you definitely want to keep it in perfect shape for your excursion. Not everyone is lucky enough to be living next to a water body. Thus for most of us transporting our crafts is just part of our day to day lives.

There are various ways to get a water craft to a river or lake. You can hire someone to carry it for you, or borrow a friend’s ride. But nothing beats the independence that you will have when you can get it there yourself.

Many kayak enthusiasts opt to have their vehicles modified with a rack to enable them to transport the craft themselves. Some craft carriers area designed so that you do not need to take them off your car ever. This way all you need to do is to load your craft whenever you are heading for the water.

Reasons for having a kayak rack for your pickup truck

  • To transport it

The basic reason for having a having this is to be able to transport your craft. You probably live away from a water body. Getting your craft there can be a tedious task if you have to rely on friends or tie it onto your truck bed.

It would thus be wise to set aside some money to get yourself a water craft carrier. Having a pickup track means that you have great options when it comes to these carriers. Your vehicle has the potential to carry about four crafts when fitted with appropriate racks.

There are many good ones that you can choose from. Make a decision to get these additions and you will not have a reason to keep away from the water.

Kayak Rack For Tacoma

  • To extend the truck bed

The truck bed of your pick up is functional and can carry much already. However when you have a craft rack added onto it, you can do much more. For example, the TMS T-NS Hitch Bed extender adds to the capacity of your pickup bed.

The increased capacity allows you to carry a distributed weight of 750 lbs which you could not carry before. This can be the weight of a kayak or two, camping gear, and even tools that you need for an outdoor excursion.

  • To carry other stuff

For most people, water crafts are a hobby that they enjoy participating in over weekends and holidays.  Many people will thus use these racks for other purposes.

The TMS-T-NS model accommodates vertical adjustments which add the capacity of the pickup by thirty inches and increased the width by 7 feet. This is a large space with which to carry things around.

When you work as a carpenter and are hauling wooden planks all the time, the extender will certainly make your work easier. Tools especially long ones can be accommodated well with the extender without scratching the sides of your pickup.

  • To protect your craft

Some canoes are foldable and can be carried in a pickup without racks. Not all of them are this way. Your preferred make may be a long vessel which you would love to protect. When carrying it with an unfitted pickup, about half of it will be sticking out the back unprotected. You can be hit from the back and have your canoe damaged.

However when you install a carrier to your track, you will be able to secure your craft. You will either carry it on your roof extension or the bed extension. With these extensions the craft will be secure and you will drive with your mind at peace.

  • To utilize your truck’s potential

Pickup trucks can do a lot. Many of them are built with off road performance features. They allow you to go where most vehicles will not go. In addition, they are sturdier than most other vehicles. Having a truck sets you apart from most other drivers.

However there is still more potential in your vehicle. When fitted with craft carriers it can carry so much more than a sedan would. Fitting pick up carriers will allow you to carry not one, but four trucks.

Thus you may want to fit them onto your vehicle to take advantage of this. Everyone knows that sports are best enjoyed together.  If you are a water sport kind of person, you will also have the chance to carry your friends’ crafts as well as your own. You can then car pool and enjoy the water together.

There are thus numerous reasons why you should fit your vehicle with these carriers. Choosing the right one will depend on what you want them to do. The checklist below will guide you on your decision.

Kayak Rack For Your Pickup Truck

  • Price

For something that will last you a long time, you may want to save up for a quality brand. If money is no object go for the name brands. However there are good quality carriers within a low price range.

  • Capacity

The capacity that you want can also be your guide. Many carriers will give you a distributed capacity of between 750 lbs and 800 lbs. This will allow you to carry more than one craft and even other equipment.

  • Adjustments

Some carriers allow you to adjust the width and the height. This is awesome for the extenders when you need to raise the back when reversing up a slope.  If this is something that you want, you will definitely find it.

  • Endurance

This can come from both the strength of the carrier as well as the resistance to rust. You may be using a salt water body for your water sports and this will make the equipment prone to rust. Thus either pick a carrier that is rust resistant, or buy one and coat it yourself.

The reason you may want to coat it yourself is that some good quality carriers don’t have this coating. You should not skip them because of a minor detail that you can correct.

With these many reasons to get a kayak rack you should start looking for one. Amazon has a great variety of carriers to choose from. You will find one that works for you.

Do You Know?

3 Easy Steps to Help You Choose the Best Kayak Rack for Your Subaru


Kayak Rack for Your Subaru

Choosing a kayak rack for your Subaru is a task that can be accomplished with a little planning and with a few considerations.  The goal is to find something that meets your requirements and works out well. There are a few things to consider when choosing your craft carrier.

These three things should be clear in your mind before choosing a carrier. Know the price range that you want. Be clear on the convenience that you want and also what you are willing to compromise on.  Also know what your model of vehicle requires.

  • Money

Your budget will dictate what type of rack you get. For some people, a budget makes no difference.  Money is no object and they can purchase whichever carrier they want. However this is not the case for most of us.

A good quality carrier that will serve you for years to come will require some substantial cash outlay on your part. If you need to, save up for this purpose. In order to make your goal clearer, do some research on the prices of the carrier that you would want.

Some name brands such as Thule and Yakima will be of the higher price category.  However there are others like the TMS brands, ROLA and universal brands that do not need much saving.

Also when considering the price it is good to remember that some quality carriers will require some work on your part. Some may require that you repaint them with rust-resistant paint. Others will require that you replace a bolt or two. These will be more affordable than the name brands and will fall in the lower price range.

  • Convenience

Consider convenience when selecting the rack. Loading and unloading your kayak onto your vehicle can be cumbersome if you choose the wrong type of rack. Some racks come with the added benefit of being able to slide them onto the roof of the vehicle from the back. This will help you to load it especially if you are alone. It eliminates the need to lift the craft above your head which may be an impossible task for some.

In order to protect your car during loading, you can buy an anti-slide mat to place between the car and the craft. This ensures that the craft slides in easily while your car does not get scratched. The top part is slippery while the bottom of the mat is tack which allows it to stick to the vehicle without rubbing off paint.

  • The model of Subaru you have

Subaru has a line of great cars each coming with unique features. The Subaru Crosstrek comes with side bars but does not have inbuilt cross bars. Therefore when you choose a craft carrier for this vehicle, you will also want to budget for cross bars. Cross bars can be purchased online from Amazon or from a local store which stocks them.

For the Subaru Outback, the cross bars come inbuilt. All you need to do is detach them from the side bars and lock them across onto the other sidebar. Therefore you will not need to factor in this cost. The 2016 model of the Outback also comes with tie downs for securing whatever you are carrying on the carrier.

The same goes for the Subaru Forester. It also has inbuilt cross bars and you will not need to factor them into your budget.

Best Kayak Rack for Your Subaru

Steps to Help You Choose the Best Kayak Rack for Your Subaru

  • Scout the market

You can look at what is available online through sites such as Amazon and eBay if you are shopping on a budget. If money is no object you can go directly to the name brand sites such as Thule and Yakima.

For budget shoppers, go through the list of the products online noting the ones which offer something extra. This could be replacement parts, technical help, lift assistance and other extras.

Also ensure that what you are looking for is actually suitable for your model of Subaru. Ask for clarity on this from the seller. Sometimes sellers especially those online selling unknown brands may tell you yes just to make a sale. You can verify this by visiting your local dealer and finding out from them.

  • Go through the customer reviews

Customer reviews on sites like Amazon are the best. They sometimes can be brutally honest. If something is not what it says it is, this is the place where you will find out the truth. The best thing about these reviews is that the writers can edit them in future as they continue to interact with the product.

Thus updates can be made on quality, how rust resistant the product actually is, the strength of the material, the quality of hardware, what needed to be replaced, and what broke within no time. This way you can tell what you’re getting yourself into when you make a purchase.

Reviewers will also go on about the awesome qualities in some products. You will find that good products have numerous positive reviews and very few critical ones. Go for such products.

  • Make the purchase and install it

Once you are satisfied with a product that you have researched on, go ahead and buy it. The product will come with a list of the items contained in it. The first thing you should do is to go through this list to make sure everything is there.

Most of these products will come with installation instructions. Follow the instructions carefully and assemble the carrier. If the instructions are unclear or not there at all, go back to the product reviews. Many times previous customers who noted this went and wrote down instructions on installation. Just follow these instructions and install the carrier.

Load your kayak and see how well it holds and if something needs tightening then do so.

Choosing your kayak carrier is thus something that can be done by following these three steps. Take your time and buy what ultimately fits your needs.

Do You Know?

Best Kayak Rack For Your Subaru

5 Most Suitable Kayak Rack for Tacoma Pickup Truck

Kayak Rack For Tacoma

The Tacoma pickup truck is an excellent vehicle for kayaking fans. It is great for off road trips to water spots that provide that much needed escape from the hustle and bustle of city life.  The Tacoma has superb features allowing these road trips such as the button selection for off road settings.

Pairing your truck with the best racks for transporting your craft is a task that needs to be under taken carefully. There are various things to consider when making a selection

  • Frequency of use

How frequently will you use these carriers to carry your craft around? If you hit the water regularly, then you will need something that is long lasting. Reviews can tell you how long people have had their carriers and how they have performed.

  • Strength

You will want to have the carrier made of strong material especially if you are hauling more than one craft. Strong carriers also allow you to carry other gear together with your craft. This could be camping-gear or other equipment. Strong materials such as steel will last you a long time.

  • Endurance

Most people will use their crafts on salty water bodies. You thus want your carrier to be rust-resistant. Otherwise your gear will wear off pretty fast. This requirement can be overlooked if the gear is strong and comes at a cheap price. You could always paint the carrier over with anti-rust paint.

  • Price

Carriers for pickup trucks are many and the price may range from very highly priced name brands to low priced brands. Your budget will determine what you get.

This is not to say that you will get poor quality for low prices. Sometimes something of high quality may lack a strong bolt which you can replace at a small price. When you compare the total cost of replacing the bolt and the price of the carrier, it will still be much lower than some brands.

  • Adjustments

It is a good to have adjustable bars which allow you to raise the gear you are carrying or lower it. This is necessary when negotiating sloping areas especially on reverse.

With these considerations in mind, consider the following carriers for your Tacoma truck.

5 Most Suitable Kayak Rack for Tacoma Pickup

#1. ROLA 59742 Haul-Your-Might Removable Truck Bed Rack

ROLA 59742 | Best Kayak Rack For Tacoma


If you have not installed bed rail systems on your Tacoma, then this is a good alternative to consider. This carrier is not only beautiful on a Tacoma truck, but it also comes with anti-theft features for the lock cover and for the T-bolt applications.


  • It comes with an installation manual to ease the process. This is especially handy when you have never installed one before.
  • This carrier is quite strong as it is made of steel material and it can haul several water crafts.
  • The colour goes well with all the colours of Tacoma trucks.


  • The alignment may be off. This will require you to drill some holes yourself in order to secure it.

#2. TracRac 27000-01 TracOne Universal Truck Rack

TracRac 27000-01 | Kayak Rack For Tacoma

This carrier comes in a strong aluminium make which has a superb look due to its dual stage powder coating. It weighs 50 lbs and has a distributed capacity of 800 lbs.  This makes it handy for carrying more than one craft as well as other stuff along with it.

It also comes with single-axis mounting clamps for securing it as well as composite loop tie-downs which are adjustable.


  • You are able to haul several crafts with this carrier. It makes it possible for you to carpool with a few friends.
  • The colour is very appealing and goes well with all Tacoma colours.


  • While the colour works well, the material is susceptible to scraping especially when it comes in touch with anything else.  Thus bumpy roads which are no problem for your truck may create scratches on the carrier.
  • The extender bolts are not very strong. It is a good idea to replace them immediately so that when you install the carrier, you won’t need to take it off again.

#3. Darby Extend-A-Truck 944 4-Feet Truck Bed Extender

Darby Extend-A-Truck 944 4-Feet | Kayak Rack For Tacoma

The Darby allows you to either carry your craft above or behind your truck. You can extend the bed to allow you to carry the craft behind. This would be great when you are driving on wide roads which are not too steep. Carrying the craft from above is great as it allows you to drive on any road without worrying about the craft.

The height of this carrier is adjustable and it comes with width support of 4 inches.


  • The assembling of this carrier is easy and can be performed even by first-timers fairly easily.
  • The hardware is of good quality and will support more than one craft.


  • The packaging is not ideal and you may find the parts to be dusty when they arrive. They come in a plastic bag which is not very good at protecting them over the long shipping trip.
  • You will need to have or buy a strap for tying the bow of the craft to the front as this carrier does not come with straps.

#4. TMS T-NS-HITCH-BED-EXTENDER Heavy Duty Pickup Truck Bed Hitch Mounted Extender Rack Ladder Canoe Boat


This is a bed extender with a capacity of 750 lbs distributed weight. The arms adjust both horizontally and vertically at 28.25-48.75 inches and 4-10 inches respectively. The side arms can also be folded to form a work table.


  • The vertical and horizontal adjustments enable you to have great ground clearance.
  • You can fit the carrier inside the track when you are not using it and then close the tail gate.


  • The fitting is not tight and you may need to correct this to avoid a wobble effect.

#5. TMS 800 LB Adjustable Fit 2 Bars Utility Ladder Truck Pick up Rack Kayak Contractor Lumber Utility

TMS 800 LB | Kayak Rack For Tacoma

This is a carrier that can have multiple functions. It can carry your craft as well as loads of other gear. It has strong frames with a carrying capacity of 800 lbs. Widths can be adjusted between 5-7 feet. Thus longer crafts can be carried.


  • You can adjust it and carry more than one craft.
  • It is fairly easy to put together even for a novice.


  • You will need to paint the parts with rust resistant paint.
  • The poor packaging that the parts come in causes paint damage.

These are just a few of the kayak racks out there in the market for Tacoma pickup trucks. These are priced reasonably and the few fixes that they may require will not cost you much. However they will last you a long time.

Do You Know?

Top 5 Best Kayak Rack for Tacoma

Top Kayak Racks for Tacoma Truck

The Tacoma truck comes unchallenged in its hardcore engineering. It is a truck that is built for any road and will conquer every obstacle. It’s TRD-tuned FOX internal bypass shocks enhance the clearance of the vehicle and give you a smooth ride even when the road gets rough.

This awesome ride enables you to even select the terrain that you are driving in for enhanced performance. The high strength steel material provides both performance and safety. The Tacoma pickup truck allows you to tow 6800 pounds which is awesome if you are planning to tow your craft.

You may also carry a water craft on racks designed specifically for these kinds of vehicle. There are many types of these carriers for the Tacoma truck.

Some allow you to extend the bed of the truck so that you can carry your craft safely on it. Others enable you to carry the craft on top by extending your roof. Most of them allow for both of these scenarios so that the ultimate choice of how to carry your craft is yours.

Some of the Best Kayak Rack for Tacoma

#1. TMS 800 LB Adjustable Fit 2 Bars Utility Ladder Truck Pick up Rack Kayak

Best Kayak Rack for Tacoma TMS 800 LB Adjustable Fit 2 Bars Utility Ladder Truck Pick up Rack Kayak  is multifunctional and can haul large items and any size of crafts. So no matter what craft you are hauling, whether a fishing kayak, a white-water craft or sit-on-top, this truck will get it safely to your destination. This carrier comes with incredibly strong frames which can carry up to 800 pounds. This can easily accommodate any water craft as most weigh less than 200 pounds. Fishing crafts weigh between 50 lbs and 150 lbs. The width of these carriers can be adjusted between 5 feet and 7 feet. This is at the point where the carrier is connected to the bed of the truck. This feature allows you to attach longer crafts to your truck. You will be assured that the craft will not come off during your trip. Whatever the height of your truck’s bed, you will have an additional 30 inches from this carrier. This pick up rack weighs 50.4 pounds.

TMS 800 LB


  • It is very easy to adjust and can carry two or three crafts. It allows you and your friends to go on trips together making the sport more enjoyable.
  • It is very strong and can withstand long trips without requiring adjustments. This is excellent for cross-country trips.
  • It is easy to assemble. Whether you have assembled one before or not, putting this together will be pretty straight forward.
  • The price is quite affordable.


  • The parts are not rust proof and so salt water will damage them. However you can get over this setback by painting them over with rust resistant paint.
  • Expect the parts to have paint damage due to poor packaging. You may have to sand them and then repaint. Again for a strong carrier like this, this is only a temporary setback. If you remedy it immediately, you will have no problem in the long run.

#2. TMS T-NS-HITCH-BED-EXTENDER Heavy Duty Pickup Truck Kayak Rack

Kayak Rack for Tacoma TMS T-NS-HITCH-BED-EXTENDER Heavy Duty Pickup Truck works by extending the truck bed to accommodate the luggage that you are carrying. Its weight capacity is 750 lbs distributed. It has adjustable arms both vertically and horizontally so that you can use it for multiple purposes. The adjustable width is 28.25 inches to 48.75 inches. The adjustable height is 4 inches to 10 inches and the carrier weighs 32 lbs. Its hitch extender can accommodate a 2 inch hitch receiver although a smaller one can also be used with the help of an adaptor. The side arms can be folded in to form a worktable. This is great for having a portable table with you when you head outdoors. Pros
  • The vertical leg is adjustable up and down and the horizontal leg is angled upwards and this allows for more ground clearance.
  • The carrier fits inside the truck when the tailgate is closed and this is excellent when not using it.
  • It is not a snug fit and many times it will wobble unless you correct this yourself.
  • When inserted into the truck’s receiver, you may find that the holes for the pin are not aligned. You will need to drill new holes to allow the pin through to secure it.

#3. Darby Extend-A-Truck 944 4-Feet Truck Bed Extender

Top Kayak Rack for Tacoma

Darby Extend-A-Truck 944 4-Feet Truck Bed Extender is a truck extender type of carrier which comes designed to haul your craft behind the truck or above it. It allows for the bed to be extended if you prefer it that way or for the roof top to be extended.

This great design can be used to ensure that your craft is nowhere near the ground and has little chance of being scrapped on bumpy roads. The width support is 4 inches and it has an adjustable height.


  • It is easy to assemble and this can be done in just a few minutes. There are no complications requiring a tech eye to understand.
  • The hardware is also of high quality and very strong. You will be able to haul your craft and two or three more without any worries.


  • The packaging is not ideal and the parts may be dusty when you receive them. This is because they may have has to endure long shipping while poorly packaged.
  • There is no strap that comes with the package to tie down the bow of the canoe in the front. You will have to buy it so that you can have the bow secured.

#4. TracRac 27000-01 TracONE Universal Truck Rack

Kayak Rack for Tacoma Truck

TracRac 27000-01 TracONE Universal Truck Rack is a quality carrier that has a distributed load capacity of 800 lbs. It is constructed with strong aluminium material and covered with dual stage powder coating in order to give an excellent finish and resist rust.

This kayak rack for tacoma weighs 50 lbs and comes with adjustable composite loop tie-downs. It can be installed very easily without any damage using single axis mounting clamps.


  • The capacity is very good for hauling water crafts. It allows you to carry a few crafts together. You and your friends can thus car pool.
  • This carrier looks good with all Tacoma trucks. The colour gives of an expensive image.


  • It is prone to scratching and you may notice some bubbling on the finish. You will need to be very careful when handling this carrier as it does not take bumps and bruises well.
  • You may want to replace the bolts that come with this extender as they will not last long. The bolts are not of the best quality. It is better to replace them immediately especially if you will be using this carrier frequently.

#5. ROLA 59742 Haul-Your-Might Removable Truck Bed Rack


This Kayak rack for tacoma is a carrier that can be fit on any truck so long as it does not have bed rail systems in it. It comes with an installer manual and is easy to put together. The ROLA also has anti-theft capabilities for the lock cover and the T-bolt applications.

May times when carrying your craft around, security becomes an issue of concern. For those taking trips across states or over long distances, parking in a public area is not an option. You thus want to be assured that our craft and carrier are secured. The ROLA gives you this assurance. No one will be making off with your craft when using  ROLA 59742 Haul-Your-Might Removable Truck Bed Rack.


  • It is very strong and can hold up to four crafts. It will save the team money by car pooling. It also means that if you don’t need to carry all these crafts, you can carry other stuff like camping gear along with your craft.
  • The ROLA enhances the good look of the Tacoma. The black colour goes well with all Tacoma colours whether blue, red, white or brown.
  • The anti-theft system is a great addition which ensures the safety of your carrier wherever you are.
  • It also comes with an installation manual to help you especially if you have never installed one before.


  • Some mounds may be welded out of alignment and you may have to fix this. This product is not always well aligned.
  • Some customers have had to realign the holes on the bars in order to secure it properly.

These are a few of the top craft racks for your Tacoma pick-up. This great truck can be paired with any of these to haul your craft to your favourite water spot. Consider the price, the durability and the capacity of these choices. If you are going to park in a public space, consider security as well. Then go for what fulfils your requirements. Ultimately for Kayak enthusiasts, the racks out there are numerous. This list has covered the options that are there at reasonable prices. The name brands are also available though they may come at much higher prices that these.

 Do You Know?

Top 7 Best Kayak Rack for Subaru – Review and Top Picks

Subaru Kayak Rack You Need

Subaru is a top of the range vehicle with awesome features for the Kayaking enthusiasts. The vehicle comes with excellent designs to help you fit your Kayak rack on the roof or at the back. This leaves you only with the decision of which one to get.  There are various models out there, each coming with advantageous qualities for you to choose from. Some of the things to look out for include the following:

  • The carrier should be strong. It should be made of strong material like steel and have a rust-proof coating to keep it looking great throughout the year.
  • The bolts should be long enough.
  • The weight should be able to accommodate your craft.
  • It should be made to fit bars of all shapes whether square, flat, round or oval shaped.
  • The straps should be strong and adjustable.
  • There should be a list of the parts accompanying the package plus an instruction manual. With a list you can ensure that all the parts are there and with a manual you will be able to assemble it.

Some of the best Kayak Rack for Subaru are described here

#1. TMS J-Bar Rack HD Kayak Carrier Canoe Boat Surf Ski Roof Top Mounted on Car SUV Crossbar

TMS J-Bar Rack HD Kayak Rack is a strong carrier made of steel which comes in the popular J style. The strength is not only provided by the steel but also by the padding that comes with it which is adjustable. The J style enables quick loading and unloading.


  • The carrier is made of strong steel material and it comes with adjustable padding enabling it to carry heavy kayaks.
  • It is easy to load a canoe or kayak onto it because of its J-style.
  • It can take up to 75 pounds weight and 36 inch widths.


  • Instructions on assemblage are poor. The tools provided are also not the best and you may have to substitute with your own.
  • The straps included must be replaced as they are not strong enough.

#2. J-Bar 2 Pairs Universal Kayak Canoe Top Mount Carrier Roof Rack Boat SUV VAN Car

Subaru Kayak Rack

J-Bar 2 Pairs Universal Kayak Rack is also an excellent carrier which comes in the J-style but which offers something extra. It comes with two pairs of carriers allowing you to carry more than one kayak on your journey.


  • It has two pairs of carriers and 4 straps.
  • Flat or square cross bars are a good fit for it whether they are custom or factory made.
  • It can accommodate up to 165 lbs.
  • It is made of strong steel material with adjustable padding.


  • You will need to buy longer bolts as the ones provided are very small.
  • The hardware is not rust-resistant and the padding is of poor quality.
  • They do not accommodate round or oval bars.
  • You may want to change the straps especially when going on long journeys.

#3. TMS® 2 Pairs J-Bar Rack HD Kayak Carrier Canoe Boat Surf Ski Roof Top Mount Car SUV Crossbar

Best Subaru Kayak Racks

TMS® 2 Pairs J-Bar Rack HD Kayak Rack is also a J-style carrier that comes in two pairs with the additional benefit of fitting all types of load bars. It has many advantages besides this.


  • It has a steel design and protects the kayak through adjustable padding. The steel material makes these carriers strong and the padding protects both your vehicle and the craft.
  • It comes with a lifetime warranty.
  • All the mounting hardware is included in the package.
  • It has rust resistant coating on all the surfaces. You may have to coat it again with rust resistant coating for it to last longer as the one it comes with comes off quickly.


  • The hardware is of low quality and the rust coating comes off quickly.
  • They fit loosely on some bars.
  • The bolts may have to be replaced with longer ones.

#4. 2 Pairs Universal J Shape Steel Kayak Canoe Paddle Surf Snow Board Carrier Roof Rack Car Top Mount

Kayak rack for Subaru

2 Pairs Universal J Shape Steel Kayak Rack are made of steel and designed with the padding that most have to protect the kayak. They can carry up to 75 lbs and will accommodate various shapes of crossbars.


  • They are easy to install on your vehicle. The installation is pretty straight forward with these carriers.
  • They are strong and will withstand long journeys at reasonable speeds.
  • The padding will protect your craft during transportation and also prevent your vehicle from being dented.


  • You will have to replace the straps right away as they are not strong enough.
  • The hardware is of poor quality and will also need to be replaced.

#5. ROLA (59912) J Style Kayak Carrier Roof Rack

ROLA (59912) J Style Kayak Carrier Roof Rack are designed for a wide range of water crafts. They are strong and designed to last for years. They come with heavy duty straps and tie downs and have foam support to protect your craft. This is one of the few carriers that actually come with strong straps that you will not have to replace immediately. They are made from powder coated steel and are rust resistant.


  • They attach with wing nuts by hand making fitting less cumbersome.
  • They are easy to install and compatible with most types of crossbars. They also come with clear instructions on installation.
  • They are strong and durable as they are made of strong steel material. They are also rust resistant and thus can be used near salt water.


  • Instruction manual is online requiring you to have a printer to get a hard copy. Downloading it on your phone will help you to install it.
  • You may need to cut the straps to the correct size. However you have the option to tie them down.
  • The bolts that come with the product may also need to be replaces with shorter ones.

#6. ABN J-Rack – Roof Top Mounted Kayak Canoe SUP Ski Surf Carrier for Car/Truck/SUV, All Weather Resistant Steel J Bar

ABN J-Rack – Roof Top Mounted Kayak Rack is a great carrier for those who want one which requires a tool-less installation. The hardware is simple to install and remove and it has a wide frame which allows for ease of loading and unloading. It is made of strong steel material and all the surfaces have been coated to endure rust-resistance. The capacity on this carrier is 75 pounds with a width of 36 inches.


  • It is easy to install these carriers and your will do it without tools. For those who are not adept at installations, this carrier will put your fears to rest. You will have it assembled within a short time.
  • They are made of strong materials. These carriers will last for a long time.


  • Straps that come with it have to be replaced. The straps are too weak to use on your craft and you will have to buy stronger ones.

#7. Genuine Subaru E361SXA200 Kayak Carrier

Top Subaru Kayak Rack

Genuine Subaru E361SXA200 Kayak Carrier is a top brand for those who are looking for Subaru manufactured carriers. They are designed to fit well with the vehicle and they come with quality straps. This product however comes with all parts guaranteed to work and in the correct size.


  • They are manufactured for Subaru vehicles. You can thus be sure that they will be compatible with your vehicle.
  • This product like other name brands in the market is guaranteed to last for a long time. It is very strong and durable.


  • You will need to purchase the Subaru clamps and cross bars separately.

In most of these carriers, you will have to replace the straps that come with the package. The bolts also may either be too long or too short. You will also need to have some handy tools like a wrench to help you with the installation. Consider your vehicle height as well because some people have found that after the installation, their vehicle will not fit in the garage. This means constant installing and uninstalling the carrier which can be cumbersome.

Price considerations may also come into play. If you are not a brand enthusiast, the options for your can be great. The customer reviews will also help you to identify what will be a good fit for you. Take your time in making a choice and then go for it.

Do You Know?

Best Digital Tire Pressure Gauge

One of the most important things that any car driver needs to be aware of is how to get the right pressure on their tires. When you are driving, it is important to pay attention to this for safety purposes. Tire pressure is in fact one of the main concerns of vehicle maintenance that you should take seriously.

Driving with tires that are under inflated will generate too much heat while you are driving, which will definitely lead to tire failure. This will also mean your tires wear out much faster, you use up too much fuel when driving, and the impact on handling and braking will also be affected.

To get the best readings, it is usually advisable to make sure the car has been parked for some 3 – 4 hours. So, how do you get to choose from the myriad of products in the market, and end up with the best digital tire pressure gauge? The following are some of the top products in the market so far, which will deliver the services you desire

Here is a list of top rated digital tire pressuare gauge in the modern market now:

  • #1. Acutire ms-4021b digital tire pressure gauge
  • #2. Tekton 5941 digital tire gauge
  • #3. Ionox tire pressure gauge with Metal Body 150PSI
    Continue reading

Top Slime Digital Tire Inflator – Top Picks And Reviews

Slime digital tire inflator for Cars

Slime digital tire inflator for Cars

The important role that your tires play in performance of your car on the road is something that you cannot take for granted. Maintaining the right tire pressure is mandatory for all car owners, though most drivers barely get this right. In our opinion, We highly recommend slime 40022 12-volt digital tire inflator

Tire inflation is an important part of road safety. Considering that it could be hard for you to find a gas station from time to time, it would be wise to get yourself the best tire inflator. The challenge that a lot of drivers have today, is knowing how to choose the best tire inflator from all those that are available in the market.

Below are 5 best slime digital tire inflator: 

  1. Slime 40022 12-volt digital tire inflator
  2. Slime 2x tire inflator
  3. Slime 40001 motorcycle tire inflator
  4. Slime top off tire inflator
  5. P.I. Auto Store Premium Digital Tire Inflator

#1. Slime 40022 12-volt digital tire inflator

Slime 40022 12-Volt Digital Tire Inflator

Slime 40022 12-volt digital tire inflator

Slime 40022 12-volt digital tire inflator combines current inflation technology with the basics to deliver error-free results when inflating your tires. Slime digital tire inflator has actually been around since 1989.


This inflator features a three-step process to get your tires to the desired pressure level as described herein:

Step 1: Tightly screw the connector to the air valve stem

Step 2: Insert the power cord outlet into the power accessory outlet in your car

Step 3: Set the pressure value you want and then press the power button

Speedy inflation

It inflates your tires in 6 minutes, for normal mid-sized car tires. This is relatively slow however, considering that most of the competing inflators deliver in 4 minutes or less.

Inflate Right Technology

This is the tech that automatically shuts down the inflator when it attains the pressure that you set for it.

Night support

It features long lasting and bright LED lights that will make your work easier at night

Slime 40022 12-volt digital tire inflator

Slime 40022 12-volt digital tire inflator – details

Use your cigarette lighter

You do not need to worry about source of power. This inflator will plug right into the cigarette lighter in your car. All you need is a 15 Amp fuse.


Another feature that will impress you is the stability that comes with this inflator. It is compact and powerful, and the rubberized feet further offer strength when in use.

#2. P.I Auto Store Premium Digital Tire Inflator

P.I Auto Store Premium Digital Tire Inflator

P.I Auto Store Premium Digital Tire Inflator

This is one of best portable air compressor for car tires. It has been in the market for a while, with several improvements done over the years.


The following are some of the key features of this inflator:

  • Longer power cable

This is important for convenience. The power cable has in the past been redesigned, and you can now extend it to 12 feet.

  • Convenient grip

The grip for this and most inflators are particularly designed as a matter of ergonomic convenience. No more need to worry about the inflator slipping off your hands during a wet day.

  • Battery powered

The inflator runs off a 12V battery. You therefore can use it whenever you need to without worrying over power.

Premium Slime Digital Tire Inflator

P.I Auto Store Premium Digital Tire Inflator

  • Microprocessor support

It is designed with a microprocessor to make sure you do not over inflate the tires. Once you set the required pressure, it will fill to the set figure and stop. It has an error margin of +/-1.

  • Packs significant power

This inflator can fill up a mid-size vehicle’s tires from a flat to 30 PSI in less than 4 minutes. It also can support up to 150 PSI.

  • Backup lights

The inflator has 8 LED lights that will help you work even at night. The LED lights have 4 different settings for convenience. If you need emergency breakdown services, it also has a red flashing light feature for that.

  • Durability

The materials from which this inflator is designed are high quality impact plastics. Together with the reinforced rubber feet and hose, this inflator is bound to serve you for a long time.

  • Multipurpose

Whether you have a car or a bicycle, this inflator will work just fine. It can also work for any other inflatable product you have in the house.

How to choose the best slime digital tire inflator? 

There are some things that you need to take into consideration before you come any close to choosing the best tire inflator. These will help you find an inflator that can meet all your needs, whenever and wherever you are:

  • Tire size

One of the key issues that you have to think about is the size of your tires. There are tire inflators that are designed to work even for tires up to 31 inches. You can also get inflators that will work for up to 33 or even 37 inch tires.

The ultimate choice here will depend on the type of tires that you have, so you must take this into consideration all the time.

  • Duration of inflation

Assuming you have tire trouble in the middle of nowhere, and you need to inflate your tires, how long would you feel safe trying to get out of this emergency situation? As fast as possible, would be the answer for most drivers.

There are tire inflators that can have a 31-inch tire filled in under 5 minutes, so this is also something that you need to think about. Be sure to read the instructions keenly, and perhaps some reviews on the performance of the inflator based on the views of people who have used it before.

  • Duty cycle

Most of the new drivers might not really get this right, but that is not something to worry about. There are some things that you can learn along the way as you keep driving. Duty cycle basically refers to the maximum continuous cycle of the tire inflator that you are looking to purchase.

On average, a tire that has a 45% duty cycle at 100 PSI and standard temperature will need around 5 minutes to cool down after being in use for 4 minutes.

Tire inflators that are labeled 100% duty cycle mean that they are designed to work continuously without cooling down.

  • Automatic shutdown

In as much as you will need a tire inflator that you can use whenever you need to, you also have to think about energy savings. A good number of inflators today are designed to automatically shut down when they attain the pressure you desire.

This is a good thing, so that you never have to worry about inflating your tires over the limit, which could cause them to burst under extreme circumstances. Other than that, you do not need to keep monitoring the tires or the pressure when it is filling. All you need to do is select the pressure you want and let the inflator do its thing.

  • Source of power

In as much as convenience is one of the key issues most people think about, not all the models will come in handy during emergency situations. There are 12V inflators that can be plugged into the cigarette lighter outlet. On the other hand, there are others that can only be powered from electric wall sockets.

To be on the safe side, purchase an inflator that you can use from anywhere, at any given time. There are in fact models that are specifically designed with battery clamps which you can affix on the battery terminals.

  • Additional features

There are inflators that are designed with special additional features to make your work easier. Some of these have a work light, which illuminates the working area. This is particularly helpful at night when you run into emergencies.

There are inflators that have a carrying bag. The bag is to ease on the storage space. Others come with inflation nozzles or even flashing hazard lights to help you alert other road users if you are stranded.

These are some of the key features that you need to look into when you want to purchase a slime digital tire inflator. Of course you must also consider things like the cost. You would not want to spend so much on an inflator, when you could easily get the best of the services it offers you and so much more, for a lower price.

Remember that in the long run, all inflators are different. Your purchase decision must therefore be based on your immediate needs, and perhaps information that you find in reviews. At the back of your mind however, you should never forget the fact that imperfections are real, and these can be found even in the best products so far.

Get more information about the Best Air Freshener For Car here!